Supermicro CSE-113TQ-563CB Bedienungsanleitung PDF herunterladen (Seite 13)

2-1

Chapter 2 System Safety

Chapter 2

System Safety

2-1 Overview

This chapter provides a quick setup checklist to get your chassis up and running.

Following the steps in the order given should enable you to have your chassis set up

and operational within a minimal amount of time. This quick setup assumes that you

are an experienced technician, famailiar with common concepts and terminology.

2-2 Warnings and Precautions

You should inspect the box the chassis was shipped in and note if it was damaged

in any way. If the chassis itself shows damage, le a damage claim with carrier

who delivered your system.

Decide on a suitable location for the rack unit that will hold that chassis. It should

be situated in a clean, dust-free area that is well ventilated. Avoid areas where heat,

electrical noise and electromagnetic elds are generated.

You will also need it placed near at least one grounded power outlet. When con-

gured, the SC113 chassis includes one power supply. "R" models (i.e. SC113TQ-

R650UB chassis) includes a redundant power supply and require two grounded

outlets.

2-3 Preparing for Setup

The SC113 chassis includes a set of rail assemblies, including mounting brackets

and mounting screws required to install the system into a rack. Please read this

manual in its entirety before beginning the installation procedure.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Keine Kommentare

Supermicro CSE-113TQ-563CB Bedienungsanleitung Seite 13