Supermicro CSE-503L-200B Bedienungsanleitung PDF herunterladen (Seite 38)

SC503 Chassis Manual

A-2

Power Cable Extenders

Number of Pins Cable Part # Length

24 pin CBL - 0042 7.9”(20 CM)

20 pin CBL - 0059 7.9”(20 CM)

8 pin CBL - 0062 7.9”(20 CM)

4 pin CBL - 0060 7.9”(20 CM)

Front Panel to the Motherboard

The SC503 chassis includes a cable to connect the chassis front panel to the

motherboard. If your motherboard uses a different connector, use the following list

to nd a compatible cable.

The SNK-P00A4 active heatsink may only be used on specic motherboards, due

to its larger 4" x 4" size. This is particularly important in systems utilizing Intel

Celeron 400 series platforms. To ascertain which heatsink is appropriate for your

motherboard, refer to the Supermicro Web site at http://www.supermicro.com.

Extending Power Cables

Although Supermicro chassis are designed with to be efcient and cost-effective,

some compatible motherboards have power connectors located in different areas.

To use these motherboards you may have to extend the power cables to the mother

boards. To do this, use the following chart as a guide.

1U Active Heatsink (SNK-P0032A4)

It is critical to choose the correct heatsink for your motherboard, that will t in the

SC503 chassis.

Recommended heatsink: Intel Celeron 400 seriew (35W) platform: Active heatsink

SNKP0032A4

Figure A-2: SNK-P00A4 Active Heatsink

1 2 ... 33 34 35 36 37 38 39 40 41 42

Keine Kommentare

Supermicro CSE-503L-200B Bedienungsanleitung Seite 38