Supermicro CSE-731D-300B Bedienungsanleitung PDF herunterladen (Seite 17)

3-3

Chapter 3 System Interface

Overheat/Fan Fail

When Flashing: This LED indicates a fan failure.

When Continuously On (not ashing): This LED indicates an overheat condi-

tion caused by cables obstructing the airow in the system or the ambient room

temperature being too warm.

Correcting an Overheat/Fan Fail Condition

Check the routing of the cables and move any cables the restrict airow.1.

Conrm that all fans are operating normally.2.

Verify that the heatsinks are installed properly.3.

If the chassis cover is not aligned correctly, the airow may be disrupted. This 4.

leads to overheating. Conrm that the chassis cover is placed correctly.

This LED will remain active as long as the overheat condition exists. 5.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Keine Kommentare

Supermicro CSE-731D-300B Bedienungsanleitung Seite 17