Supermicro CSE-742I-450B Betriebsanweisung PDF herunterladen (Seite 18)

III. Removing the Top Chassis Cover and Chassis Feet to Install as Rackmount:

You will need to remove the top chassis cover to add rack rails to the chassis:

Note

: Rail assemblies are optional. P/N:

CSE-PT26B (black) and CSE-PT26.

Procedure

1. Push the release tab in the center of the cover lip while pushing the cover toward the rear

of the chassis at the same time. After the cover stops, lift it off.

2. Each chassis foot has a single screw. Remove the screw then depress the foot’s locking

tab from the inside of the chassis. Slide the foot off.

3. You can now attach rack rails to the top and bottom (now the sides) of the chassis. See

the diagram below.

1 2 ... 13 14 15 16 17 18

Keine Kommentare

Supermicro CSE-742I-450B Betriebsanweisung Seite 18