Supermicro H8DAI-2 Bedienungsanleitung PDF herunterladen (Seite 23)

Chapter 2: Installation

2-3

3. Align pin 1 of the CPU with pin 1

of the socket. Once aligned, carefully

place the CPU into the socket. Do not

drop the CPU on the socket, move the

CPU horizontally or vertically or rub the

CPU against the socket or against any

pins of the socket, which may damage

the CPU and/or the socket.

4. With the CPU inserted into the

socket, inspect the four corners of the

CPU to make sure that it is properly in-

stalled and ﬂ ush with the socket. Then,

gently lower the silver CPU retention

plate into place.

5. Carefully press the CPU socket

lever down until it locks into its reten-

tion tab. For a dual-processor system,

repeat these steps to install another

CPU into the CPU#2 socket.

Note: if using a single processor, only

the CPU1 DIMM slots are addressable

for a maximum of 32 GB memory.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 83 84

Keine Kommentare

Supermicro H8DAI-2 Bedienungsanleitung Seite 23