
2-4
TPM User's Guide
5. Select "Enabled," and press <Enter>.
6. Save changes and reset to save your changes and allow them to take effect.
The TXT is now enabled.
7. Use a third-party tool to test the hypervisor launch.
2.4 Intel Provision Utility
To lock the TPM, you must run the Intel Provision Utility.
1. Save a copy of the utility to a USB ash drive, and plug the drive into your
sytem. To download the utility, contact Supermicro support.
2. Boot into the UEFI shell. There are two ways you can do this, described below:
• Option 1: From the BIOS, scroll to the Save & Exit tab. Select the option
"UEFI: Built-in EFI Shell" under Boot Override, as shown in the screenshot
on the next page. Press <Enter>. If a window pops up that prompts, "Save
conguration and reset?" select "Yes" and press <Enter>.
Kommentare zu diesen Handbüchern