Supermicro CSE-216E26-R1200LPB Bedienungsanleitung PDF herunterladen (Seite 29)

5-7

Chapter 5: Chassis Setup and Maintenance

Motherboard Installation

Installing the Motherboard

Review the documentation that came with your motherboard. Become familiar 1.

with component placement, requirements, precautions, and cable connec-

tions.

Open the chassis cover.2.

If necessary, remove the air shroud and riser card bracket.3.

Ensure that the I/O shield has been installed correctly.4.

As required by your motherboard, install standoffs in any areas that do not 5.

have a permanent standoff and remove any standoffs that are not required by

the motherboard.

Lay the motherboard on the chassis aligning the permanent and optional 6.

standoffs

Secure the motherboard to the chassis using the rounded, Phillips head 7.

screws which are included in the motherboard bag of the accessory box. Do

not exceed eight pounds of torque when securing the motherboard.

Secure the CPU(s), heatsinks, and other components to the motherboard as 8.

described in the motherboard documentation.

Connect the cables between the motherboard, backplane, chassis, front 9.

panel, and power supply, as needed. Additionally, the fans may be temporar-

ily removed to allow access to the backplane ports and to allow for ease of

installation.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 96 97

Keine Kommentare

Supermicro CSE-216E26-R1200LPB Bedienungsanleitung Seite 29