Supermicro X9SCM-F Bedienungsanleitung PDF herunterladen (Seite 87)

Chapter 4: AMI BIOS

4-17

SEL Components - Change this item to enable or disable all features of System

Event Logging. The options are Enabled and Disabled. When Enabled, the

following can be congured:

Erase SEL - This option erases all logged SEL events. The options are No,

Yes, On Next reset and Yes, On Every reset.

When SEL Full

This option automatically clears the System Event Log memory of all messages

when it is full. The options are Do Nothing and Erase Immediately.

Log EFI Status Codes

This option enables or disables the logging of Extensible Firmware Interface (EFI)

status codes. The options are Disabled, Both, Error Code and Progress Code.

View FRU Information

This is an informational item which displays the information pertaining to this

motherboard (FRU - Field Replaceable Unit).

BMC Network Conguration

Set this feature to congure the IPMI LAN adapter with a network address.

Conguration Source

This feature selects whether the IP address, Subnet Mask and Gateway Address

are automatically assigned by the network's DHCP server (Dynamic Host and Con-

guration Protocol) "Dynamic" or manually entered by the user "Static". If Static is

selected, the IP Address, Subnet Mask and Gateway Address must be manually

entered below. The options are Static, Dynamic and Do Nothing. The following

items are displayed when Static is selected:

Station IP Address - Enter the IP address for this machine. This should be in

decimal and in dotted quad form (i.e., 192.168.10.253). The value of each three-

digit number separated by dots should not exceed 255.

Subnet Mask - Subnet masks tell the network which subnet this machine be-

longs to. The value of each three-digit number separated by dots should not

exceed 255.

Station MAC Address - MAC addresses are 6 two-digit hexadecimal numbers

(Base 16, 0 ~ 9, A, B, C, D, E, F) separated by dots (i.e., 00.30.48.D0.D4.60).

Router IP Address - Enter the Gateway or Router address this machine will

use (i.e., 192.168.10.1).

Router MAC Address - Enter the MAC address of the Router or Gateway (only

if needed).

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 102 103

Keine Kommentare

Supermicro X9SCM-F Bedienungsanleitung Seite 87