Supermicro X9SRH-7F Bedienungsanleitung PDF herunterladen (Seite 77)

Chapter 4: AMI BIOS

4-1

Chapter 4

BIOS

4-1 Introduction

This chapter describes the AMI BIOS Setup Utility for the X9SRH Motherboard

Series. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily up-

dated. This chapter describes the basic navigation of the AMI BIOS Setup Utility

setup screens.

Note: For instructions on BIOS recovery, please refer to the instruction

guide posted at http://www.supermicro.com/support/manuals/.

Starting BIOS Setup Utility

To enter the AMI BIOS Setup Utility screens, press the <Delete> key while the

system is booting up.

Note:In most cases,the<Delete> key isused to invoke theAMI BIOS

setup screen. There are a few cases when other keys are used, such as

<F1>,<F2>,etc.

Each main BIOS menu option is described in this manual. The Main BIOS setup

menu screen has two main frames. The left frame displays all the options that can

be congured. Grayed-out options cannot be congured. Options in blue can be

congured by the user.The right frame displays the key legend.Above the key

legend is an area reserved for a text message. When an option is selected in the

left frame, it is highlighted in white. Often a text message will accompany it. (Note:

the AMI BIOS has default text messages built in. Supermicro retains the option to

include, omit, or change any of these text messages.)

The AMI BIOS Setup Utility uses a key-based navigation system called "hot keys".

Most of the AMI BIOS setup utility "hot keys" can be used at any time during the

setupnavigationprocess.Thesekeysinclude<F3>,<F4>,<Enter>,<ESC>,arrow

keys, etc.

Note 1:  <F3>isused to loadoptimal default settings.<F4> is usedto

save the settings and exit the setup utility.

Note 2: Options printed in Bold are default settings.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 114 115

Keine Kommentare

Supermicro X9SRH-7F Bedienungsanleitung Seite 77