Supermicro SuperChassis 836BA-R1K28B Bedienungsanleitung PDF herunterladen (Seite 48)

SC836 Chassis Manual

5-4

2. Place the hard drive carrier on a at, stable surface such as a desk, table, or

work bench.

3. Slide the hard drive into the carrier with the printed circuit board side facing

down.

4. Carefully align the mounting holes in the hard drive and the carrier. Make sure

the bottom of the hard drive and bottom of the hard drive carrier are ush.

5. Secure the hard drive using all six screws.

6. Return the hard drive carrier into the chassis. Lock the hard drive carrier into

the drive bay by closing the drive carrier handle until it clicks into the locked

position.

Hard Drive

Carrier

SAS/SATA Hard

Drive

Figure 5-3. Installing a Hard Drive into a Hard Drive Carrier

Use a hard, stable surface

when installing the hard drive

Warning! Enterprise level hard disk drives are recommended for use in Supermicro

chassis and servers. For information on recommended HDDs, visit the Supermicro

web site at http://www.supermicro.com

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 143 144

Keine Kommentare

Supermicro SuperChassis 836BA-R1K28B Bedienungsanleitung Seite 48