Supermicro AOC-USAS-H4IR Betriebsanweisung PDF herunterladen (Seite 46)

6-12

Add-on Card User's Guide

Using Manual Conﬁ guration: RAID 5

Follow these steps to create a RAID 5 storage conﬁ guration using the Manual

Conﬁ guration mode of the Conﬁ guration Wizard.

1. In the ﬁ rst Manual Conﬁ guration window, select three available drives in the

left panel. Click the Right Arrow button to move the selected drives to the right

panel.

Note: MegaRAID Storage Manager software will not allow you to select the disk

drive on which the operating system is installed or any other drives that are

already part of a conﬁ guration.

2. Click Accept to accept these drives for the new RAID 5 array.

Note: To remove a single drive from a proposed new array, select the drive icon

in the right panel and click the Left Arrow button.

3. Click Next.

The next Conﬁ guration Wizard window appears.

The Arrays with Free Space menu lists the new array that you just deﬁ ned,

plus any existing arrays with holes (free space) that could be used for a new

conﬁ guration.

4. From the Arrays with Free Space menu, select the array to use for the new

virtual disk.

5. In the right panel, select RAID 5 as the RAID level.

6. (Optional) Set Size (in MB) to a lower number if you do not want to use the entire

available capacity for the new virtual disk.

7. (Optional) Change the other Virtual Disk Properties, if necessary.

8. Click Accept to accept the conﬁ guration of the new virtual disk.

Note: Click the Reclaim button if you want to undo a virtual disk that you just

deﬁ ned.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53 54

Keine Kommentare

Supermicro AOC-USAS-H4IR Betriebsanweisung Seite 46