Supermicro AOC-USAS-H4IR Betriebsanweisung PDF herunterladen (Seite 47)

6-13

Safety Information and Technical Speciﬁ cations

Using Manual Conﬁ guration: RAID 10

Follow these steps to create a RAID 10 storage conﬁ guration using the Manual

Conﬁ guration mode of the Conﬁ guration Wizard:

1. In the ﬁ rst Manual Conﬁ guration window, shown in Figure 6-5, select two avail-

able drives in the left panel. Click the Right Arrow button to move the selected

drives to the right panel.

2. Click Accept to accept these drives for a new RAID 1 array.

3. Select two more drives for a second RAID 1 array, and click Accept.

4. To add a hotspare, select an available drive in the left panel. Select the array from

the drop-down menu, and click Add Hotspare To, as shown in Figure 6-7.

5. To remove a hotspare from an array, select it in the right panel and click Remove

HotSpare.

6. Click Next.

The next Conﬁ guration Wizard window appears, as shown in Figure 6-6.

The Arrays with Free Space menu lists the new arrays that you just deﬁ ned,

plus any existing arrays with holes (free space) that could be used for a new

conﬁ guration.

7. In the left panel, select the two RAID 1 arrays from the menu.

8. In the right panel, select RAID 10 as the RAID level.

9. Click Next to continue with the next conﬁ guration step. The Virtual Disk Sum-

mary window appears.

10. Review the conﬁ guration shown in the Virtual Disk Summary window. If you

want to change something, click Back and change the conﬁ guration parameters.

11. Click Finish to accept the conﬁ guration and start the initialization process (un-

less you selected No Initialization earlier).

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54

Keine Kommentare

Supermicro AOC-USAS-H4IR Betriebsanweisung Seite 47