Supermicro 2016Ti-HTRF Bedienungsanleitung PDF herunterladen (Seite 39)

Chapter 5: Advanced Motherboard Setup

5-5

Installing the LGA1156 Processor

Press the load lever to release the load plate, which covers the CPU socket, 1.

from its locked position.

5-5 Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure on

the label area of the fan.

Notes:

Always connect the power cord last and always remove it before adding, re-

•

moving or changing any hardware components. Make sure that you install the

processor into the CPU socket before you install the CPU heatsink.

If you buy a CPU separately, make sure that you use an Intel-certiﬁ ed multi-

•

directional heatsink only.

Make sure to install the serverboard into the chassis before you install the CPU

•

heatsinks.

When receiving a serverboard without a processor pre-installed, make sure that

•

the plastic CPU socket cap is in place and none of the socket pins are bent;

otherwise, contact your retailer immediately.

Refer to the Supermicro web site for updates on CPU support.

•

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 105 106

Keine Kommentare

Supermicro 2016Ti-HTRF Bedienungsanleitung Seite 39