Supermicro 2022TC-BTRF Bedienungsanleitung PDF herunterladen (Seite 42)

5-8

A+ Server 2022TC-BIBQRF/BTRF User's Manual

5-6 Installing Memory

Installing Memory

Insert each memory module vertically into its slot, paying attention to the 1.

notch along the bottom of the module to prevent inserting the module

incorrectly (see Figure 5-3).

Install to slots P1/DIMM1A, P1/DIMM2A, etc. For best performance always 2.

install in groups of two and in the numerical order of the DIMM slots. See

support information below.

Gently press down on the memory module until it snaps into place.3.

With two CPUs installed, repeat step 2 to populate the CPU2 DIMM slots. For 4.

best performance always install in groups of two and in the numerical order of

the DIMM slots.

Note: 1 GB, 2 GB, 4 GB, 8 GB and 16 GB memory modules are supported. It

is highly recommended that you remove the power cord from the system before

installing or changing memory modules. Please refer to our web site for memory

that has been tested on the H8DCT-IBQF/H8DCT-F serverboard.

Memory Support

The H8DCT-IBQF/ H8DCT-F serverboard supports single and dual channel,

DDR3-1333/1066/800 registered ECC/Unbuffered ECC/non-ECC SDRAM.

Populating two slots at a time with memory modules of the same size and type will

result in interleaved (128-bit) memory, which is faster than non-interleaved (64-bit)

memory.”

Maximum Memory

The H8DCT-IBQF/H8DCT-F serverboard supports up to 32 GB of ECC/Non-ECC

UDIMM or up to 128 GB of ECC RDIMM in 12 DIMM slots.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 103 104

Keine Kommentare

Supermicro 2022TC-BTRF Bedienungsanleitung Seite 42