Supermicro 2022TC-BTRF Bedienungsanleitung PDF herunterladen (Seite 54)

5-20

A+ Server 2022TC-BIBQRF/BTRF User's Manual

I2C to PCI-Express Slot

JI

2

C1/JI

2

C2 slot allows you to enable the I

2

C

bus to communicate with the PCI-Express

slot. For the jumpers to work properly, please

set both jumpers to the same setting. If

enabled, both jumpers must be enabled. If

disabled, both jumpers must be disabled.

See the table on the right for jumper

settings.

I

2

C to PCI-Express Slot

Jumper Settings

(JI

2

C1/JI

2

C2)

Jumper Setting Deﬁ nition

Closed Enabled

Open Disabled

BMC Jumper

JPB1 is used to enable or disable theBMC

(Baseboard Management Control) Chip and

the onboard IPMI connection.This jumper is

used together with the IPMI settings in the

BIOS. The default position is on pins 1 and

2 to Enable BMC. See the table on the right

for jumper settings.

BMC Jumper Enable (JPB1)

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Enabled (default)

Pins 2-3 Disabled

VGA Enable/Disable

JPG1 allows you to enable or disable the

VGA port. The default position is on pins 1

and 2 to enable VGA. See the table on the

right for jumper settings.

VGA Enable/Disable

Jumper Settings (JPG1)

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

LAN Enable/Disable

Change the setting of jumper JPL1 to enable

or disable the LAN1/2 Ethernet ports. See

the table on the right for jumper settings. The

default setting is enabled.

LAN Jumper Settings

(JPL1)

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

Watch Dog Enable/Disable

JWD1 enables the Watch Dog function, a

system monitor that takes action when a

software application freezes the system.

Jumping pins 1-2 will have WD reboot the

system if a program freezes. Jumping pins

2-3 will generate a non-maskable interrupt for

the program that has frozen. See the table

on the right for jumper settings. Watch Dog

must also be enabled in BIOS.

Note: When Watch Dog is enabled,

the user must write their own

application software to disable the

Watch Dog Timer.

Watch Dog

Jumper Settings (JWD1)

Jumper Setting Deﬁ nition

Pins 1-2 Reset

Pins 2-3 NMI

Open Disabled

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 103 104

Kommentare zu diesen Handbüchern

Keine Kommentare