Supermicro SuperStorage Server 2027R-E1R24L Bedienungsanleitung PDF herunterladen (Seite 27)

3-2

SUPERSTORAGESYSTEM 2027R-E1R24L User's Manual

Power Fail

Indicates a power supply module has failed. The second power supply module will

take the load and keep the system running but the failed module will need to be

replaced. Refer to Chapter 6 for details on replacing the power supply. This LED

should be off when the system is operating normally.

Overheat/Fan Fail

When this LED ﬂ ashes, it indicates a fan failure. When on continuously it indicates

an overheat condition, which may be caused by cables obstructing the airﬂ ow in

the system or the ambient room temperature being too warm. Check the routing of

the cables and make sure all fans are present and operating normally. You should

also check to make sure that the chassis covers are installed. Finally, verify that

the heatsinks are installed properly (see Chapter 5). This LED will remain ﬂ ashing

or on as long as the indicated condition exists.

NIC1

Indicates network activity on the LAN1 port when ﬂ ashing.

NIC2

Indicates network activity on the LAN2 port when ﬂ ashing.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 130 131

Keine Kommentare

Supermicro SuperStorage Server 2027R-E1R24L Bedienungsanleitung Seite 27