Supermicro SSE-G48-TG4 Bedienungsanleitung Seite 55

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 268
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 54
5-27
Chapter 5: Web Based Management Utility
IP Extended ACL
Clicking the IP EXTENDED ACL tab brings up the IP EXTENDED ACL CONFIGURATION page
(Figure 5-22), which displays the various parameters required to configure the Extended
IP access lists. The parameters for this page are shown in Table 5-13.
Figure 5-22. IP Extended ACL Page
Table 5-13. IP Extended ACL Configuration Page Parameters
Parameter Description
ACL Number
This parameter specifies the unique ID for the access list. This value must be in
the range from 1001 to 65535.
Action
This parameter specifies whether the packets must be allowed or dropped when
a match has been found.
Source and
Destination IP
Address
This parameter specifies the IP Address for which the access list must be
applied.
Subnet Mask This parameter specifies the Address Mask corresponding to the IP Address.
Ports List (Incoming)
This parameter specifies the Incoming Port List for which the filter has to be
applied.
Ports List (Outgoing)
This parameter specifies the Outgoing Port List for which the filter has to be
applied.
Protocol This parameter specifies the type of protocol.
Message Code This parameter specifies the Message Code to be checked for ICMP Packets.
Message Type This parameter specifies the Message Type to be checked for ICMP Packets.
Seitenansicht 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 267 268

Kommentare zu diesen Handbüchern

Keine Kommentare