Supermicro SYS-7046A-6 Bedienungsanleitung PDF herunterladen (Seite 82)

7-14

SuperWorkstation 7046A-6 User's Manual

S.M.A.R.T. For Hard disk drives

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending drive failures. Select Auto to allow the AMI BIOS to automatically de-

tect hard disk drive support. Select Disabled to prevent the AMI BIOS from using

the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to

support hard drive disk. The options are Disabled, Enabled, and Auto.

32Bit Data Transfer

Select Enable to enable the function of 32-bit IDE data transfer. The options are

Enabled and Disabled.

IDE Detect Timeout (sec)

Use this feature to set the time-out value for the BIOS to detect the IDE devices

installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 35.

XPCI/PnP Conﬁ guration

Clear NVRAM

This feature clears the NVRAM during system boot. The options are No and Yes.

Plug & Play OS

Selecting Yes allows the OS to conﬁ gure Plug & Play devices. (This is not required

for system boot if your system has an OS that supports Plug & Play.) Select No to

allow the AMI BIOS to conﬁ gure all devices in the system.

PCI Latency Timer

This feature sets the latency Timer of each PCI device installed on a PCI bus. Select

64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128,

160, 192, 224 and 248.

PCI IDE Bus Master

When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives.

The options are Disabled and Enabled.

Slot 1 Option ROM~Slot 6 Option ROM

Select Enabled to enable Slot 1 Option ROM~Slot 6 Option ROM, which will allow

you to boot the computer from a PCI device installed on a PCI slot. The options

are Disabled and Enabled.

LAN1 PXE/LAN2 PXE PXE Option ROM

Select Enabled to enable the onboard LAN1/LAN2 PXE Option ROMs. This is

to boot computers using a network interface. The options are Enabled and Dis-

abled.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 97 98

Keine Kommentare

Supermicro SYS-7046A-6 Bedienungsanleitung Seite 82