Supermicro SYS-7047GR-TPRF Bedienungsanleitung PDF herunterladen (Seite 94)

SUPERWORKSTATION 7047GR-TPRF User's Manual

7-18

Network Stack

Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unied

Extensible Firmware Interface) for network stack support. The options are Enabled

and Disabled.

Super IO Conguration

Super IO Chip: This item displays the Super IO chip used in the motherboard.

Serial Port 1 Conguration

Serial Port

Select Enabled to enable a serial port specied by the user. The options are En-

abled and Disabled.

Device Settings

This item displays the settings of Serial Port 1.

Change Settings

Use this feature to set the optimal Platform Environment Control Interface (PECI)

setting for a serial port specied. The default setting is Auto, which will allow the

AMI BIOS to automatically select the best PECI setting.

Serial Port 2 Conguration

Serial Port

Select Enabled to enable a serial port specied by the user. The options are En-

abled and Disabled.

Device Settings

This item displays the settings of Serial Port 2.

Change Settings

Use this feature to set the optimal Platform Environment Control Interface (PECI)

setting for a serial port specied. The default setting is Auto, which will allow the

AMI BIOS to automatically select the best PECI setting.

Serial Port 2 Attribute

Use this feature to select the attribute for serial port 2. The options are SOL (Serial

On LAN), and COM.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 113 114

Keine Kommentare

Supermicro SYS-7047GR-TPRF Bedienungsanleitung Seite 94