Supermicro SYS-8016B-6F Bedienungsanleitung PDF herunterladen (Seite 64)

6-6

SUPERSERVER 8016B-6F/8016B-TF User's Manual

Figure 6-4. Mounting a Drive in a Carrier

Important: Regardless of how many hard drives are installed, all drive

carriers must remain in the drive bays to maintain proper airﬂ ow.

SAS/SATA Drive Installation

Mounting a Drive in a Drive Carrier

The SAS/SATA drives are mounted in drive carriers to simplify their installation and

removal from the chassis. These carriers also help promote proper airﬂ ow for the

drive bays. For this reason, even empty carriers without drives installed must remain

in the chassis. To add a new drive, install a drive into the carrier with the printed

circuit board side facing down so that the mounting holes align with those in the

carrier. Secure the drive to the carrier with six screws, as shown in Figure 6-4.

Enterprise level hard disk drives are recommended for use in

Supermicro chassis and servers. For information on recommended

HDDs, visit the Supermicro Web site at http://www.supermicro.com/

products/nfo/ﬁ les/storage/SAS-1-CompList-110909.pdf

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 105 106

Keine Kommentare

Supermicro SYS-8016B-6F Bedienungsanleitung Seite 64