Supermicro H8DAI-2 Bedienungsanleitung PDF herunterladen (Seite 66)

4-12

H8DA3-2/H8DAi-2 User’s Manual

 Chipset Conﬁ guration

 NorthBridge Conﬁ guration

 Memory Conﬁ guration

Memclock Mode

This setting determines how the memory clock is set. Auto has the memory

clock by code and Manual and Limit allow the user to set a standard value.

MCT Timing Mode

Sets the timing mode for memory. Options are Auto and Manual.

Bank Interleaving

Select Auto to automatically enable interleaving-memory scheme when this

function is supported by the processor. The options are Auto and Disabled.

Enable Clock to All DIMMs

Use this setting to enable unused clocks to all DIMMSs, even if some DIMM

slots are unpopulated. Options are Enabled and Disabled.

MemClk Tristate C3/ALTVID

Use this setting to Enable or Disable memory clock tristate during C3 and

ALT VID.

CS Sparing Enable

This setting will reserve a spare memory rank in each node when enabled.

Options are Enable and Disable.

DQS Signal Training Control

This setting is used to Enable or Disable the DQS Signal Training Mode.

Memory Hole Remapping

When "Enabled", this feature enables hardware memory remapping around

the memory hole. Options are Enabled and Disabled.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 83 84

Keine Kommentare

Supermicro H8DAI-2 Bedienungsanleitung Seite 66