Supermicro H8DAI-2 Bedienungsanleitung PDF herunterladen (Seite 71)

Chapter 4: BIOS

4-17

 System Health Monitor

CPU Overheat Alarm

Use the "+" and "-" keys to set the CPU temperature threshold to between 65

and 90

C. When this threshold is exceeded, the overheat LED on the chas-

sis will light up and an alarm will sound. The LED and alarm will turn off once

the CPU temperature has dropped to 5 degrees below the threshold set. The

default setting is 72

The submenu includes monitor displays for the following information:

CPU1 Temperature, CPU2 Temperature (for dual CPU systems), System Tem-

perature, CPU1Vcore, CPU2Vcore (for dual CPU systems), 3.3V, +5Vin, +12Vin,

5V standby and battery voltage.

 System Fan Monitor

Fan Speed Control Modes

This feature allows the user to determine how the system will control the speed

of the onboard fans. Select "Workstation" if your system is used as a Worksta-

tion. Select "Server" if your system is used as a Server. Select "Disable" to

disable the fan speed control function to allow the onboard fans to continuously

run at full speed (12V). The options are 1) Disabled (Full Speed) 2) Server

Mode 3) Workstation Mode 4) Workstation Quiet Mode and 5) Workstation

Super Quiet Mode.

FAN1 Speed through FAN8 Reading

The speeds of the onboard fans (in rpm) are displayed here.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 83 84

Keine Kommentare

Supermicro H8DAI-2 Bedienungsanleitung Seite 71