
7-33
Chapter 7: 1/10-Gb Ethernet Switch Firmware
SNMP Group Settings
Clicking the GROUP tab brings up the SNMP GROUP SETTINGS page (Figure 7-27). This
page helps you map a combination of the S
ECURITY MODEL and the SECURITY NAME into
a G
ROUP NAME, which is used to define an access control policy. In addition, this page
displays the S
TORAGE TYPE of the Group Table. The parameters for this page are shown
in Table 7-17.
Context Name
This parameter sets the CONTEXT NAME that the management information
is accessed from when using the community string, which is specified by
the corresponding instance of the SNMP community name.
Transport Tag This parameter sets the T
RANSPORT TAG Identifer.
Storage Type This parameter sets the Volatile Storage or Non-Volatile Storage setting.
Figure 7-27. SNMP Group Settings Page
Table 7-17. SNMP Group Settings Page Parameters
Parameter Description
Security Model
This parameter allows you to select from version 1, version 2 or version 3
for the S
ECURITY MODEL used.
Security Name Use this parameter to specify the SECURITY NAME string.
Table 7-16. SNMP Community Settings Page Parameters (Continued)
Parameter Description
Kommentare zu diesen Handbüchern