Supermicro AOC-XEH-IN2 Bedienungsanleitung Seite 43

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 392
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 42
3-11
Chapter 3: Setup and Installation
3. Once the boot sequence is interrupted, it will display menu options as shown in
Figure 3-7.
Use the "H" option to set hardware information by typing the character H. This will
display the hardware information that can be changed as shown in Figure 3-8.
4. To choose the boot from a fallback image, type the command: rflag=1
5. Type Save to save the hardware information.
6. Type Exit to exit the hardware information menu.
7. Type J to boot the image. In this case it will boot from a fallback image.
NOTE: The numbers in the Product Type entry change depending upon the
switch you are using.
Figure 3-8. Setting Hardware Information
Seitenansicht 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare