
Superblade Network Modules User’s Manual
7-48
QOS Classmap Settings
Clicking the CLASSMAP tab brings up the QOS CLASSMAP SETTINGS page (Figure 7-41),
which is used to classify the stream of traffic. The parameters for this page are shown in
Table 7-30.
Table 7-29. QOS Basic Settings Page Parameters
Parameter Description
System Control With this parameter SYSTEM CONTROL can Start or Shutdown QoS.
Status This parameter allows enabling/disabling of the QoS status.
Figure 7-41. QOS Classmap Settings Page
Table 7-30. QOS Classmap Settings Page Parameters
Parameter Description
Classmap ID
This parameter specifies a unique ID for the Classmap. It must be in the
range from 1 to 65535.
Filter ID
This parameter specifies the unique filter ID associated with this
Classmap.
Filter Type
This parameter specifies the filter type associated with the Classmap. It
can be set as either MAC filter (1) or IP filter (2).
Kommentare zu diesen Handbüchern