Supermicro 1022G-URF Bedienungsanleitung Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 95
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
1-3
Chapter 1: Introduction
Graphics Controller
The H8DGU-F features an integrated Matrox G200eW graphics chip, which includes
16 MB of DDR2 memory.
Other Features
Other onboard features that promote system health include onboard voltage
monitors, auto-switching voltage regulators, chassis and CPU overheat sensors,
virus protection and BIOS rescue.
1-3 Server Chassis Features
The 1022G-URF is built upon the SC815TQ-R700UB chassis. Details on the chassis
and on servicing procedures can be found in Chapter 6.The following is a general
outline of the main features of both chassis.
System Power
The SC815TQ-R700UB features a redundant 700W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
The SC815TQ-R700UB features a single 560W power supply module. The system
must be shut down when replacing or removing this power supply module.
Hard Drive Subsystem
The SC815TQ-R700UB chassis was designed to support four hot-swap SAS/SATA
hard drives. (Requires UIO controller card - not included with system.)
Note: A SAS or SATA UIO card must be installed to support SAS or SATA
drives.
PCI Expansion Slots
A riser card (RSC-R1UU-UE16, optional) on the left side of the chassis can support
a AOC-PG-i2+ add-on card to provide two additional Gb LAN ports. Alternately, this
slot can instead support either a UIO card, one PCI-E x16 card, or four SAS/SATA
drives with an optional UIO SAS card. See our web site for details (http://www.
supermicro.com/products/nfo/UIO.cfm). See section 5-6 for further details.)
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 94 95

Kommentare zu diesen Handbüchern

Keine Kommentare