Supermicro 1022G-URF Bedienungsanleitung PDF herunterladen (Seite 44)

5-10

A+ SERVER 1022G-URF User's Manual

5-6 Adding PCI Cards

PCI Expansion Slots

A riser card is used to support a left side add-on card to the system.

Installing the PCI Expansion Card

Remove the chassis cover.1.

Install the riser card by sliding card into the appropriate slot in the 2.

motherboard.

Choose the PCI slot shield in which to place the add-on card. 3.

In that slot, open the PCI slot shield lever and slide the shield sideways. 4.

From inside the chassis, remove the PCI slot shield.5.

Slide the add-on card into the riser card and attach the add-on card bracket 6.

in place of the PCI slot shield.

Secure the add-on card by closing the PCI slot shield lever.7.

Connect cables to the add-on card as necessary.8.

Note: If the left side riser is with 2 or more x8 PCI-E slots make sure an installed

card on the left side riser is detected. If it is not, then go to the system’s BIOS Setup

and in Advanced/ PCI/PnP Conﬁ guration /SXB1 Conﬁ guration BIOS setting select

the [2x8] option. Then save the BIOS setting changes and reboot the system.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 94 95

Keine Kommentare

Supermicro 1022G-URF Bedienungsanleitung Seite 44