Supermicro 1022G-URF Bedienungsanleitung PDF herunterladen (Seite 64)

Chapter 6: Advanced Chassis Setup

6-1

Chapter 6

Advanced Chassis Setup

This chapter covers the steps required to install components and perform

maintenance on the 815TS-R700UBP chassis. For component installation, follow

the steps in the order given to eliminate the most common problems encountered.

If some steps are unnecessary, skip ahead to the next step.

Tools Required: The only tool you will need to install components and perform

maintenance is a Philips screwdriver.

6-1 Static-Sensitive Devices

Electrostatic discharge (ESD) can damage electronic com ponents. To prevent

damage to any printed circuit boards (PCBs), it is important to handle them very

carefully. The following measures are generally sufﬁ cient to protect your equipment

from ESD damage.

Precautions

Use a grounded wrist strap designed to prevent static discharge.•

Touch a grounded metal object before removing any board from its antistatic •

bag.

Handle a board by its edges only; do not touch its components, peripheral chips, •

memory modules or gold contacts.

When handling chips or modules, avoid touching their pins.•

Put the serverboard, add-on cards and peripherals back into their antistatic •

bags when not in use.

For grounding purposes, make sure your computer chassis provides excellent •

conductivity between the power supply, the case, the mounting fasteners and

the serverboard.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 94 95

Keine Kommentare

Supermicro 1022G-URF Bedienungsanleitung Seite 64