Supermicro SuperWorkstation 5037A-i Bedienungsanleitung PDF herunterladen (Seite 19)

Chapter 4: System Safety

4-1

Chapter 4

System Safety

4-1 Electrical Safety Precautions

Basic electrical safety precautions should be followed to protect yourself from

harm and the SuperWorkstation 5037A-I from damage:

•Be aware of the locations of the power on/off switch on the chassis as well

as the room's emergency power-off switch, disconnection switch or electrical

outlet. If an electrical accident occurs, you can then quickly remove power from

the system.

•Do not work alone when working with high-voltage components.

•Power should always be disconnected from the system when removing or install-

ing main system components, such as the motherboard, memory modules and

the DVD-ROM. When disconnecting power, you should rst power down the sys-

tem with the operating system. The unit has more than one power supply cord.

Disconnect both power supply cords before servicing to avoid electrical shock.

•When working around exposed electrical circuits, another person who is familiar

with the power-off controls should be nearby to switch off the power if neces-

sary.

•Use only one hand when working with powered-on electrical equipment. This

is to avoid making a complete circuit, which will cause electrical shock. Use

extreme caution when using metal tools, which can easily damage any electrical

components or circuit boards they come into contact with.

•Do not use mats designed to decrease electrostatic discharge as protection from

electrical shock. Instead, use rubber mats that have been specically designed

as electrical insulators.

•The power supply power cord must include a grounding plug and must be

plugged into grounded electrical outlets.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 101 102

Keine Kommentare

Supermicro SuperWorkstation 5037A-i Bedienungsanleitung Seite 19