Supermicro 1022G-URF Bedienungsanleitung Seite 78
- Seite / 95
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Chapter 7: BIOS
7-7
PIO Mode
PIO (Programmable I/O) mode programs timing cycles between the IDE drive
and the programmable IDE controller. As the PIO mode increases, the cycle
time decreases.
The options are Auto, 0, 1, 2, 3, and 4. Select Auto to allow BIOS to auto
detect the PIO mode. Use this value if the IDE disk drive support cannot be
determined. Select 0 to allow BIOS to use PIO mode 0, which has a data
transfer rate of 3.3 MBs. Select 1 to allow BIOS to use PIO mode 1, which
has a data transfer rate of 5.2 MBs. Select 2 to allow BIOS to use PIO mode
2, which has a data transfer rate of 8.3 MBs. Select 3 to allow BIOS to use
PIO mode 3, which has a data transfer rate of 11.1 MBs. Select 4 to allow
BIOS to use PIO mode 4, which has a data transfer rate of 16.6 MBs. This
setting generally works with all hard disk drives manufactured after 1999.
For other disk drives, such as IDE CD-ROM drives, check the specifi cations
of the drive.
DMA Mode
Selects the DMA Mode. Options are Auto, SWDMA0, SWDMA1, SWDMA2,
MWDMA0. MDWDMA1, MWDMA2, UDMA0. UDMA1, UDMA2, UDMA3,
UDMA4 and UDMA5. (SWDMA=Single Word DMA, MWDMA=Multi Word
DMA, UDMA=UltraDMA.)
S.M.A.R.T.
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select "Auto" to allow BIOS to auto detect hard
disk drive support. Select "Disabled" to prevent AMI BIOS from using the
S.M.A.R.T. Select "Enabled" to allow AMI BIOS to use the S.M.A.R.T. to sup-
port hard drive disk. The options are Disabled, Enabled, and Auto.
32-Bit Data Transfer
Select "Enabled" to activate the function of 32-Bit data transfer. Select "Dis-
abled" to deactivate the function. The options are Enabled and Disabled.
IDE Detect Timeout (Sec)
Use the +/- keys to adjust and select the time out for detecting ATA/ATAPI
devices. The default value is 35.
- SUPER 1
- Manual Revision 1.0b 2
- About This Manual 3
- Manual Organization 3
- Table of Contents 6
- Chapter 3 System Interface 7
- Chapter 4 System Safety 7
- Chapter 7 BIOS 9
- Chapter 1 11
- Introduction 11
- 1-2 Serverboard Features 12
- 1-3 Server Chassis Features 13
- Front Control Panel 14
- I/O Backplane 14
- Cooling System 14
- System Block Diagram 15
- Chapter 1: Introduction 15
- 1-4 Contacting Supermicro 16
- Chapter 2 17
- Server Installation 17
- Warnings and Precautions! 18
- Rack Mounting Considerations 19
- Installing the Inner Rails 20
- Installing the Outer Rails 21
- Chapter 3 27
- System Interface 27
- Solid Red CPU Overheat 28
- 3-4 Hard Drive Carrier LEDs 30
- Chapter 4 31
- System Safety 31
- 4-3 ESD Precautions 33
- LITHIUM BATTERY 34
- BATTERY HOLDER 34
- Chapter 5 35
- Advanced Serverboard Setup 35
- No. 1 Screw 38
- No. 2 Screw 38
- 5-3 Connecting Cables 39
- 5-4 I/O Ports 40
- 5-5 Installing Memory 41
- (4 GB Total System 43
- 5-6 Adding PCI Cards 44
- 5-7 Serverboard Details 45
- H8DGU(-F) Quick Reference 46
- 5-8 Connector Defi nitions 47
- SGPIO Header Pin Defi nitions 50
- (T-SGPIO1/T-SGPIO2) 50
- UIO Power Connector 50
- Pin Defi nitions (UIOP) 50
- UID Button 52
- Pin Defi nitions 52
- 5-9 Jumper Settings 53
- 5-10 Onboard Indicators 55
- 1 Ground 5 RXN 56
- 2 TXP 6 RXP 56
- 3 TXN 7 Ground 56
- 4 Ground 56
- 5-12 Enabling SATA RAID 57
- 5-13 Installing Drivers 60
- Supero Doctor III 61
- Chapter 6 64
- Advanced Chassis Setup 64
- 6-2 Control Panel 65
- 6-3 System Fans 65
- Optional Fan 66
- Accessing the Drive Bays 67
- Removing the Front Bezel 67
- Hard Drive Installation 68
- DVD-ROM Drive Installation 69
- 6-5 Power Supply 70
- Chapter 7 72
- 7-3 Advanced Settings Menu 73
- Processor and Clock Options 74
- Advanced Chipset Control 75
- NorthBridge Confi guration 75
- ECC Confi guration 76
- DRAM Timing Confi guration 76
- IDE Confi guration 77
- PCI/PnP Confi guration 79
- Remote Access Confi guration 80
- ACPI Confi guration 82
- IPMI Confi guration 82
- View BMC System Event Log 82
- Set LAN Confi guration 82
- 7-4 Security Menu 84
- 7-5 Boot Menu 85
- 7-6 Exit Menu 85
- Appendix A 88
- BIOS Error Beep Codes 88
- Appendix B 90
- Installing Windows 90
- Appendix C 92
- System Specifi cations 92
- Regulatory Compliance 94
Verwandte Produkte und Handbücher für Server Barebones Supermicro 1022G-URF
Server Barebones Supermicro SYS-1025TC-TB Datenblatt
(104 Seiten)
(104 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.425 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern