Supermicro 1012C-MRF Bedienungsanleitung PDF herunterladen (Seite 24)

2-10

A+ Server 1012C-MRF User's Manual

2-6 Checking the Drive Bay Setup

Checking the Drives

For servicing the SATA and DVD-ROM drives, you will need to remove the 1.

top chassis cover. The SATA disk drive is located at the front of the chassis'

interior.

Refer to Chapter 6 if you need to reinstall a DVD-ROM drive to the system.2.

Depending upon your system's conﬁ guration, your system may have a SATA 3.

hard drive already installed. If you need to install a SATA hard drive, please

refer to the appropriate section in Chapter 6.

Checking the Airﬂ ow

Airﬂ ow is provided by sets of 4-cm counter-rotating fans. The system 1.

component layout was carefully designed to promote sufﬁ cient airﬂ ow through

the small 1U rackmount space.

Also note that all power and data cables have been routed in such a way that 2.

they do not block the airﬂ ow generated by the fan.

Providing Power

The last thing you must do is to provide input power to the system. Plug the 1.

power cord from the power supply unit into a high-quality power strip that

offers protection from electrical noise and power surges. It is recommended

that you use an uninterruptible power supply (UPS).

Finish by pushing the power button on the control panel to power up the 2.

system.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 91 92

Keine Kommentare

Supermicro 1012C-MRF Bedienungsanleitung Seite 24