Supermicro 1012C-MRF Bedienungsanleitung PDF herunterladen (Seite 45)

Chapter 4: System Safety

5-13

NIC2 (LAN2) LED

The LED connections for LAN2 are on pins

9 and 10 of JF1. Attach LAN LED cables to

display network activity. See the table on the

right for pin deﬁ nitions.

HDD LED

The HDD LED connection is located on pins

13 and 14 of JF1. Attach the hard drive LED

cable here to display disk activity (for any

hard drives on the system, including SAS,

Serial ATA and IDE). See the table on the

right for pin deﬁ nitions

NIC1 LED

Pin Deﬁ nitions

(JF1)

Pin# Deﬁ nition

11 Vcc

12 Ground

NIC2 LED

Pin Deﬁ nitions

(JF1)

Pin# Deﬁ nition

9 Vcc

10 Ground

NIC1 (LAN1) LED

The LED connections for LAN1 are on pins

11 and 12 of JF1. Attach LAN LED cables to

display network activity. See the table on the

right for pin deﬁ nitions.

Power On LED

The Power On LED connector is located

on pins 15 and 16 of JF1. This connection

is used to provide LED indication of power

being supplied to the system. See the table

on the right for pin deﬁ nitions.

Power LED

Pin Deﬁ nitions

(JF1)

Pin# Deﬁ nition

15 5V Stby

16 Control

NMI Button

The non-maskable interrupt button header is

located on pins 19 and 20 of JF1. Refer to the

table on the right for pin deﬁ nitions.

NMI Button

Pin Deﬁ nitions

(JF1)

Pin# Deﬁ nition

19 Control

20 Ground

LAN1/2 (Ethernet Ports)

Two Gigabit Ethernet ports (designated LAN1

and LAN2) are located beside the VGA port.

Additionally, for the H8SCM(-F) serverboard,

there is a dedicated LAN for IPMI on top of

the two rear USB ports. These Ethernet ports

accept RJ45 type cables.

HDD LED

Pin Deﬁ nitions

(JF1)

Pin# Deﬁ nition

13 Vcc

14 HD Active

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare