Supermicro SuperServer 8047R-TRF+ Bedienungsanleitung PDF herunterladen (Seite 119)

B-1

Appendix B: System Speciﬁ cations

Appendix B

System Speciﬁ cations

Processors

Quad Intel E5-4600 Series series (Socket R-LGA 2011 type) processors

Note: You must install at least two processors for full functions to be supported.

Note: Please refer to our web site for a complete listing of supported processors.

Chipset

One Intel C602 chipset

BIOS

16 MB SPI AMI BIOS® SM Flash BIOS

Memory Capacity

The X9QRi-F+/X9QR7-TF+ serverboard supports thirty-two (32) 240-pin

DIMM sockets that can support up to 1024GB of Registered (RDIMM),

Load Reduced (LRDIMM) ECC or Unbuffered (UDIMM) ECC/Non-ECC

DDR3 1600/1333/1066/800 MHz speed SDRAM in a two-channel memory bus with

memory sizes of 1GB, 2GB, 4GB, 8GB, 16GB and 32GB size @ 1.35V/1.5V voltages.

Note: LRDIMM (Reduced Load) memory supports only DDR3 1333/1066/800 MHz speeds.

See the memory section in Chapter 5 for details.

SAS/SATA Controller

Intel C602 on-chip controller for six-port SATA subsystem (two SATA

3.0 and four SATA 2.0 ports), which is either RAID 0 and 1 (SATA3) or

RAID 0, 1, 5, and 10 (SATA2) Windows/LINUX supported. The SATA drives are

hot-swappable units.

A LSI

2208 SAS controller is integrated into the X9QR7-TF+ serverboard to provide

an eight port SAS (Serial Attached SCSI) subsystem, which is RAID 0, 1, 5, 6 and 10

supported (8047R-7RFT+ server only). The SAS drives are hot-swappable units.

Drive Bays

Five hot-swap 3.5" drive bays to house up to ﬁ ve SATA or SAS drives (additional

ﬁ ve 3.5" hard drives available with optional M35 mobile rack), and three 5.25"

peripheral drive bays

1 2 ... 114 115 116 117 118 119 120 121 122

Keine Kommentare

Supermicro SuperServer 8047R-TRF+ Bedienungsanleitung Seite 119