Supermicro SuperServer 8047R-TRF+ Bedienungsanleitung PDF herunterladen (Seite 56)

5-16

SUPERSERVER 8047R-TRF+/7RFT+ USER'S MANUAL

Reset Button

Pins 3 and 4 of JF1 attaches to the reset

button on the computer chassis. See

the table on the right for pin deﬁ nitions.

Power Button

The power button connection is located

on pins 1 and 2 of JF1. Momentarily

contacting both pins will power on/off

the system. This button can also be

conﬁ gured to function as a suspend

button (with a setting in the BIOS). To

turn off the power when the system is

set to suspend mode, press the button

for at least 4 seconds. Refer to the table

on the right for pin deﬁ nitions.

5-8 Connector Deﬁ nitions

Required Connection

+12V 8-pin Power

Pin Deﬁ nitions

Pins Deﬁ nition

1 - 4 Ground

5 - 8 +12V

ATX Power 24-pin Connector

Pin Deﬁ nitions

Pin# Deﬁ nition Pin # Deﬁ nition

13 +3.3V 1 +3.3V

14 -12V 2 +3.3V

15 COM 3 COM

16 PS_ON 4 +5V

17 COM 5 COM

18 COM 6 +5V

19 COM 7 COM

20 Res (NC) 8 PWR_OK

21 +5V 9 5VSB

22 +5V 10 +12V

23 +5V 11 +12V

24 COM 12 +3.3V

Reset Button

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

3 Reset

4 Ground

Power Button

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

1 PW_ON

2 Ground

Processor Power Connector

JPW2, JPW3, JPW4 and JPW5 provide

power for the processors. All four should

be connected to your power supply. See

the table on the right for pin deﬁ nitions.

Main ATX Power Supply Connector

A 24-pin main power supply

connector(JPW1) and four 8-pin CPU

PWR connectors (JPW2/3/4/5) are

located on the motherboard. These

power connectors meet the SSI EPS

12V specification. You must also

connect the 8-pin processor power

connectors to your power supply (see

below).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 121 122

Kommentare zu diesen Handbüchern

Keine Kommentare