Supermicro SuperServer 8047R-TRF+ Bedienungsanleitung PDF herunterladen (Seite 57)

Chapter 5: Advanced Serverboard Setup

5-17

Overheat/Fan/Pwr Fail/UID LED

Connect an LED to pins 7 and 8 of JF1

to use the Overheat/Fan Fail/Power

Fail/UID LED functions. The red LED

on pin 7 provides warning of overheat,

fan failure or power failure. The blue

LED on pin 8 works as the front panel

UID LED indicator. The red LED takes

precedence over the blue LED by

default. Refer to the table on the right

for pin deﬁ nitions.

HDD LED

The HDD LED connection is located on

pins 13 and 14 of JF1. This LED is used

to display all SATA activity. See the table

on the right for pin deﬁ nitions.

NIC2 LED

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

9 Activity

10 Link

HDD LED

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

13 3.3V

14 HD Active

NIC2 (JLAN2) LED

The LED connections for JLAN2 are on

pins 9 and 10 of JF1. Attach an LED

cable to display network activity. See

the table on the right for pin deﬁ nitions.

NIC1 LED

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

11 Activity

12 Link

NIC1 (JLAN1) LED

The LED connections for JLAN1 are on

pins 11 and 12 of JF1. Attach an LED

cable to display network activity. See

the table on the right for pin deﬁ nitions.

OH/Fan Fail Indicator

Status

State Deﬁ nition

Off Normal

On Overheat

Flashing Fan Fail

OH/Fan Fail/ Pwr Fail/UID LED

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

7 Red + (Blue LED Cathode)

8 Blue (OH/Fan Fail/

PWR Fail/UID LED)

Power On LED

The Power On LED connector is located

on pins 15 and 16 of JF1 (use JLED for

a 3-pin connector). This connection is

used to provide LED indication of power

being supplied to the system. See the

table on the right for pin deﬁ nitions.

Power LED

Pin Deﬁ nitions (JF1)

Pin# Deﬁ nition

15 3.3V

16 Control

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 121 122

Kommentare zu diesen Handbüchern

Keine Kommentare