Supermicro SuperServer 8047R-TRF+ Bedienungsanleitung PDF herunterladen (Seite 63)

Chapter 5: Advanced Serverboard Setup

5-23

VGA Enable/Disable

JPG1 allows you to enable or disable

the VGA port. The default position is on

pins 1 and 2 to enable VGA. See the

table on the right for jumper settings.

VGA Enable/Disable

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

Watch Dog Enable/Disable

JWD controls the Watch Dog function.

Watch Dog is a system monitor that

can reboot the system when a software

application hangs. Jumping pins 1-2

(the default setting) will cause WD

to reset the system if an application

hangs. Jumping pins 2-3 will generate

a non-maskable interrupt signal for the

application that hangs. See the table on

the right for jumper settings. Watch Dog

must also be enabled in BIOS.

Note: When enabled, the user needs

to write their own application software

in order to disable the Watch Dog Timer.

Watch Dog

Jumper Settings (JWD)

Jumper Setting Deﬁ nition

Pins 1-2 Reset

Pins 2-3 NMI

Open Disabled

BMC Enable

Jumper JPB1 allows you to enable

the embedded WPCM 450 BMC

(Baseboard Management) Controller to

provide IPMI 2.O/KVM support on the

motherboard. See the table on the right

for jumper settings.

BMC Enable

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 BMC Enable

Pins 2-3 Normal

BMC Reset

Use jumper JPRST1 to reset the BMC

settings on the motherboard. See the

table on the right for jumper settings.

BMC Reset

Jumper Settings

Jumper Setting Deﬁ nition

Closed BMC Reset

Open Normal (Default)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 121 122

Kommentare zu diesen Handbüchern

Keine Kommentare

Supermicro SuperServer 8047R-TRF+ Bedienungsanleitung Seite 63

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server Barebones Supermicro SuperServer 8047R-TRF+